BEMIS HEALTH CARE 538410 Mode D'emploi page 2

Directions for Use
MANIFOLD WITH TANDEM TUBING
1. Clip manifold to top of stand.
2. Attach tubing connections of manifold to the ports
underneath the reusable canister/bracket.
3. Attach patient tube to the patient port of any of the four
Quick-Fit liners.
4. Attach tandem tube to the tandem port of the first canister and to the patient port of the next canister.
5. Repeat the tandem-to-patient, tandem-to-patient connection until the last canister is reached.
6. Cap last tandem port and all pour spouts.
7. Connect vacuum tubing to the manifold vacuum port.
8. Open stopcock on manifold to all Quick-Fit liners.
WHEN CANISTERS ARE FULL:
1. LEAVE VACUUM ON AND STOPCOCKS OPEN while removing patient and tandem tubing.
2. Cap all pour spouts, patient ports, and tandem ports.
3. Turn off all stopcocks.
4. Disconnect vacuum tube from vacuum port of all liners and cap ports.
5. Dispose of liners according to hospital policy.
Note: All used and unused liners must be discarded.
P = PATIENT
V = VACUUM
T = TANDEM
V
T P
STOPCOCK
OFF
POSITION
(CLOSED)
2
T
V
P
MANIFOLD
VACUUM PORT
STOPCOCK
STOPCOCK
STOPCOCK
P
V
T
MODEL #
538410 4-Liner Stopcock Manifold
536510 18" Tandem Tubing
534910 4-Canister Stand
TO
VACUUM
TO
PATIENT
P
T
V
SIDE VIEW OF
VACUUM PORTS
STOPCOCK
OFF
POSITION
(OPEN)