SETTING MENU1
– SETTING PROGRAM REC
6
PROGRAM SETUP 1
START STOP DATE
•
❿
13:03
•
13:03
•
•
OFF
•
13:03
•
PROGRAM SETUP2
❿
(
❷
CAUTION
1. You can use only the POWER or RESET
buttons during PROGRAM REC.
2. During a PROGRAM REC, to
cancel the recording, press the POWER
button.
3. To cancel a PROGRAM REC, select the
event and press the CLEAR button to
display "OFF".
Pressing the SHIFT
the OFF position to toggles to the time
set before.
REFERENCE
You can set up to 10 programs a week
19
All manuals and user guides at all-guides.com
PROGRAM SETUP1
MODE
→
13:15
MON
L6H
→
13:15
DAILY
L18H
→
13:15
MON
L30H
/– +,CLEAR)
END:MENU
❿ ❿
¤button again in
• How to set a PROGRAM REC
example) To set up a programmed recording
from 13:03 to 13:15 on Monday in
the L6H mode.
❷
❷ ¤
1. Press the SHIFT
button to move the cursor
to the vacant program position.
❿ ❿
¤button to display the current
2. Press the SHIFT
time.
3. Press the TRACKING/SET "+" or "-" buttons to
set the starting time hour.
❿ ❿
¤button to move to the
4. Press the SHIFT
minute.
5. Press the TRACKING/SET "+" or "-" buttons to
set the starting time minute.
6. By the same methode, set the ending time
and move to the date.
7. Press the TRACKING/SET "+" or "-" buttons to
set Monday and press SHIFT
❷
❷
8. Press the SHIFT
button to set L6H and
❿ ❿
press SHIFT
button.
9. By the same method, set up the NEXT
PROGRAM REC you desire.
• DAILY : The programmed recording is made at
the same time every day.
❿ ❿
button.