Télécharger Imprimer la page

Oregon Scientific BPW120 Mode D'emploi page 4

Masquer les pouces Voir aussi pour BPW120:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
Mean arterial
pressure
Pulse
Millimeter(s)
of mercury
Kilopascal
Memory
Weak battery
Inflating
Deflating
NOTE: The arrow on the left side of the LCD display indicates
the type of measurement taken and its unit (for example, MAP
measured in mmHg, or SYS/DIA measured in kPa)
P/N: 086L003591-148 REV1
Page 4 of 122
All manuals and user guides at all-guides.com
The average blood pressure
measured (for more
information, see page 4, "What
is Mean Arterial Pressure?").
Pulse rate per minute.
Measurement unit for
blood pressure
Measurement unit
for blood pressure
If "MEM" shows, the displayed
measurement value is from the
memory, and not necessarily
from the last reading.
Batteries are low and need
to be replaced.
Unit is inflating with air to
obtain the required level of
pressure.
Wrist cuff air is exhausting,
SAFETY AND CARE INSTRUCTIONS
SAFETY PRECAUTIONS
Please observe the following safety precautions when setting
up and using your blood pressure monitor.
· This device is intended for adult use only.
· This device is intended for non-invasive measuring and
monitoring of arterial blood pressure. It is not intended for
use on extremities other than the wrist or for functions other
than obtaining a blood pressure measurement.
· Do not confuse self-monitoring with self-diagnosis. This unit
allows you to monitor your blood pressure. Do not begin or
end medical treatment based solely on the measurements
of this device. Consult a physician for treatment advice.
· If you are taking medication, consult your physician to
determine the most appropriate time to measure your blood
pressure. Never change a prescribed medication without
consulting your physician.
· This unit is not suitable for continuous monitoring during
medical emergencies or operations.
· If the cuff pressure exceeds 300mmHg, the unit will
automatically deflate. Should the cuff not deflate when
pressures exceeds 300mmHg, detach the cuff from the wrist
and press the
button to stop inflation.
· To avoid measurement errors, carefully read this manual
before using the product.
3

Publicité

loading