Publicité
Les langues disponibles
Les langues disponibles
Garment Plus
You can add or take out laundry items even
after the wash has started, as long as the
Garment Plus indicator is on. Pressing
Start/Pause unlocks the lid. If you open the
lid and want to continue the wash cycle,
close the lid, and then press Start/Pause.
NOTE
If you have activated the Child Lock, you
must deactivate it first. See page 33.
Delay End
You can set the washer to start your wash
automatically at a later time, by choosing a
delay time.
The hour displayed indicates the time at
which the wash will be ended.
1. Set your wash cycle.
2. Press Delay End repeatedly until the
delay time is set.
3. Press Start/Pause. The "Delay End"
indicator will be lit, and the clock will
begin counting down until it reaches the
set time.
4. To cancel a Delay End function, press the
Power button and then turn the washer
on again.
Pre Soak
Use this function when the laundry is
heavily contaminated or stained. This
function improves the wash performance by
adding a Pre Soak cycle.
• If you select this function, the total cycle
time is increased by 15 minutes.
• When the Pre Soak cycle starts, the
washer repeats a wash cycle after
supplying water and then performs a
15-minute soak cycle.
WA7700J-03520D-07-EN.indd 35
• When the Pre Soak cycle is complete,
the configured wash cycle starts without
draining water.
AquaJet™
With a strong spray and soapy water
recirculated by the AquaJet™ pump, laundry
can be more gently and thoroughly cleaned
than in conventional Top Loads.
• AquaJet™ Deep Clean: If AquaJet™ Deep
Clean is selected, washing performance
can be further improved by the
additional spray action. Sufficient water
quantity can be ensured by adjusting the
water level.
Cycles
NORMAL,
HEAVY DUTY,
SUPER SPEED
(WA48J7770A*),
COLORS/DARKS
(WA48J7700A*),
PERM PRESS,
ACTIVE WEAR,
RINSE+SPIN
BEDDING,
DELICATES,
WATERPROOF,
QUICK WASH, SPIN
AquaJet™ Deep
Clean
Available
Not available
English 35
2015/12/22 15:39:48
Publicité
