Wetelux 84 21 70 Mode D'emploi page 13

All manuals and user guides at all-guides.com
1. Unscrew the lamphead from the LED torch light and
remove the battery holder from the battery compart-
ment.
2. Insert two CR123 batteries or one Li-Ion rechargeable
battery of the type 18650 into the battery holder. Insert
the battery holder into the battery compartment. The
plus pole of the battery/batteries has to face towards the
lamphead.
3. Screw the lamphead back on the LED torch light.
Using
 Strongly press the ON/OFF button once until you hear a
click sound. The LED torch light switches on. Strongly
press the ON/OFF button again to turn off the LED torch
light. Each time you press the On/Off button the next
function of the LED torch light will be activated. The
sequence is as follows:
Full light beam  Low light beam  Flashing Mode
When the LED torch light is switched ON:
 Lightly press the ON/OFF button without hearing a click
sound. The LED torch light changes in the order from
full light to low light beam mode and to the flashing
mode.
Using
XI