Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONFIGURATION
Monitor setup under Windows 95/98/ME and
2000:
For Windows 95/98/ME and 2000 users: Installation of
the Belinea driver software is highly recommended. This
can be obtained from your Belinea dealer or downloaded
from Belinea's internet homepage at www.belinea.com.
Choose Support, Downloads, then Driver Software and
Installation Guide and download BELINEA.EXE by
clicking on Driver.
Copy the file to a folder on your hard disk (e.g.
C:\BELINEA),
and
double-click
decompression.
BASIC SETUP
Shortcut for adjusting contrast and brightess .......................................................................................................
You can adjust the contrast and brightness directly by
ƒ
turning the OSD dial (
in figure 4) while the OSD menu
is not active. Turning the dial clockwise displays the
OSD contrast menu, while turning it counter-clockwise
IMAGE SETTINGS USING THE OSD MENU
The OSD menu appears in a window on your screen. It
allows you to select the image settings you want to
change.
Figure 4. Monitor features
14 - Belinea 10 30 85
All manuals and user guides at all-guides.com
it
to
start
After decompression you will find the file BELINEA.TXT
in your folder, providing further information on how to
install the Belinea driver software.
Monitor setup under Windows NT 4.0:
Under Windows NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the "Settings" à "Control
Panel" à "Display" à "Settings" menu.
displays the OSD brightness menu. Then turn the dial
clockwise to increase, or counter-clockwise to decrease
the contrast/brightness.
How to open the OSD menu ...................................
1. Press the MENU/EXIT button (
display the OSD menu on the screen.
2. Select the desired function icon using the OSD dial
ƒ
(
in figure 4, see the following section "OSD Menu
Icons").
…
3. Press the ENTER button (
the function.
4. Enter the desired value by turning the OSD dial.
5. To store the setting, press the ENTER button again.
Repeat steps 2-4 to make further adjustments as
needed.
6. The OSD menu will automatically disappear if no
changes are made for more than 10 seconds. The
current settings will be saved. You can also close it
manually by pressing the MENU/EXIT button.
„
in figure 4) to
in figure 4) to activate
Publicité
