DeWalt D28490 Mode D'emploi page 27

Release the unlocking switch (3).
● For continuous operation, press and hold down
the switch (1), press the lock-on button (2) and
release the switch.
● To stop the tool, release the switch.
● To stop the tool in continuous operation, press
the switch briefl y and release it. Always switch
off the tool when work is fi nished and before
unplugging.
On/off switch (1) with unlocking switch (3)
(France only)
● To run the tool, depress the unlocking switch (3)
and subsequently operate the on/off switch (1).
Release the unlocking switch (3).
● To stop the tool, release the switch.
@ Do not switch the tool on or off when
under load.
Metal applications
● When using the tool in metal applications, make
sure that a residual current device (RCD) has
been inserted to avoid residual risks caused by
metal swarf.
● If the power supply is shut off by the RCD, take
the tool to authorised D
! In extreme working conditions,
conductive dust can accumulate inside
the machine housing when working with
metal. This can result in the protective
insulation in the machine becoming
degraded with a potential risk of an
electrical shock.
To avoid build-up of metal swarf inside the
machine, we recommend to clear the ventilation
slots on a daily basis. See "Maintenance".
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
All manuals and user guides at all-guides.com
WALT repair agent.
E
A
Lubrication
Your power tool requires no additional lubrication.
S
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Clearing the ventilation slots
To avoid build-up of dust inside the machine,
we recommend to clear the ventilation slots on
a daily basis.
● Unplug the machine.
● Blow dry compressed air through the ventilation
slots.
● Clear the ventilation slots using a soft brush or
dry cloth. Do not use metallic objects as these
might damage the internal parts.
Protecting the environment
Separate collection. This product must
Z
not be disposed of with normal
household waste.
Should you fi nd one day that your D
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
z Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have
E
E N G L I S H
WALT product
E
27