Electrolux ENB38807X Notice D'utilisation page 21

Removing the shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the power
socket.
Important! To carry out the following operations,
we suggest that this be made with another person
that will keep a firm hold on the doors of the
appliance during the operations.
To change the opening direction of the door, do
these steps:
1. Open the door with the appliance in the up-
right position. Unscrew the screws (t1) and re-
move the upper door plastic trim (t2). Close
the door.
All manuals and user guides at all-guides.com
2. Remove the little plastic cover from the door
3. Remove the panel (t4). If it is necessary use a
4. Remove the upper door.
5. Unscrew the screw and remove the door stop-
t1
t1
d7
plastic trim and refit on the opposite side (t3).
screwdriver very carefully. Unscrew the screw
on the other side. Remove the upper door
mount (t5). Place them in an empty plastic
bag.
t4
per (d1). Attach it reversed on the other side.
electrolux 21
t1
t2
t3
t5