Publicité
Les langues disponibles
Les langues disponibles
5.1 - REPLACING THE COIL
I) Fastening nut
Remove the fastening ring nut (17)
with a 35mm commercial spanner
m
Now proceed with replacing the coil
p
Remove the washer (II) Insert the new coil and position the
s
• On completion of the above operations, proceed with wiring the coil just installed, as shown in 3.2
Madas Technical Manual - 1|1.5cX - REV. 1 of 10
All manuals and user guides at all-guides.com
a
II) Washer
n
Loosen the nut (I) with a 35mm
q
t
Sep 2020
th
III) Threaded bar
Remove the O-Ring (16)
commercial spanner
O-Ring
19
Complete coil
(including connector/board)
supplied as a spare part
Extract and remove the coil (3)
o
Remove the coil from the threaded
bar (III)
r
Tighten and secure the fastening
ring nut again with a 35 mm
commercial spanner
u
XV(F)-1-3-6
Publicité
