Publicité
Les langues disponibles
Les langues disponibles
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products� Only use a cloth with
warm soapy water�
To remove spots or stains from the surface of the interior, use a
cloth dampened with water and a little vinegar, or a cleaning
product made specifically for dishwashers�
When not in use for a long time
It is recommend that you run a wash cycle with the dishwasher
empty and then remove the plug from the socket, turn off the
water supply and leave the door of the appliance slightly open�
GB
This will help the door seals to last longer and prevent odors from
forming within the appliance�
Moving the appliance
If the appliance must be moved, try to keep it in the vertical
position� If absolutely necessary, it can be positioned on its back�
Seals
One of the factors that cause odours to form in the dishwasher is
food that remains trapped in the seals� Periodic cleaning with a
damp sponge will prevent this from occurring�
80
Installation instruction
WARNING
Electrical Shock Hazard
Disconnect electrical power before installing
dishwasher�
Failure to do so could result in death or electrical
shock�
Attention
The installation of the pipes and electrical equipment should be
done by professionals�
About Power Connection
WARNING
For personal safety:
• Do not use an extension cord or an adapter plug with this
appliance�
• Do not, under any circumstances, cut or remove the earthing
connection from the power cord�
Electrical requirements
Please look at the rating label to know the rating voltage and
connect the dishwasher to the appropriate power supply� Use
the required fuse 10A/13A/16A, time delay fuse or circuit breaker
recommended and provide separate circuit serving only this
appliance�
GB
81
Publicité
