Publicité
Les langues disponibles
Les langues disponibles
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
Important
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not
earthed. connect the appliance to a separate
earth in compliance with current regulations,
consulting a specialist technician.
The
Manufacturer
responsibility if the above safety
precautions are not observed.
Building-in
Dimensions of the recess
Height of housing (1) 880 mm
Depth of housing (2)
550 mm
Width of housing (3)
560 mm
PR01
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
All manuals and user guides at all-guides.com
declines
all
B
T H
This appliance complies with the following E.E.C.
Directives:
- 87/308 EEC of 2/6/87 relative to radio
interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage
Directive)
and subsequent modifications.
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Attention!
It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.
1. Make sure that a distance of 44 mm is maintained
in the lower part between the kitchen furniture and
the border of the appliance. The lower hinge cover
inserted in the accessories bag, is useful to
guarantee the exact position of the kitchen
furniture and the appliance. Also make sure that
the appliance does not clamp the mains cable.
D724
2. Apply joint the sealing strip as shown in figure.
1
2
33
Publicité
