Black & Decker KC9072 Manuel D'utilisation page 24

ENGLISH
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact the local Black & Decker service agent
who will be happy to help. Full details of our after sales
service can be obtained from any of our Black & Decker
service agents.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the protection
of your hearing if the sound level seems uncomfortable.
This normally equates to a sound pressure in excess
of 85dB (A).
Note: This user manual also covers more than one
catalogue number within this product group. Refer to
your carton for details of your product. Your product
includes some or all of these features.
FEATURES
1
•
•
3
1. Screwdriver bit
2. Forward/reverse selector
3. Adjustable clutch
4. Charger base
5. Battery
CHARGING YOUR CORDLESS SCREWDRIVER
Important: On delivery, your screwdriver is not
charged. Before using your screwdriver for the first
24
All manuals and user guides at all-guides.com
• 5
2
•
4
•
time, charge it for at least 12 hours.
After use place your screwdriver in its base and it will
charge automatically. You can leave your screwdriver
on charge indefinitely. The charger base is designed to
operate 24 hours a day.
While charging, the transformer may hum and become
warm to touch. This is a normal condition and does not
indicate a problem. When charging, always ensure that
the switch is in the central position.
The transformer can remain plugged into the electrical
outlet indefinitely with no adverse effects. It will remain
slightly warm to the touch if left plugged in; this is
normal and does not indicate a problem.
The charger is designed to charge the batteries only
and should never be used in an attempt to operate the
screwdriver.
If the batteries do not charge properly, check the
current at the supply socket by plugging in a lamp or
other appliance, and check to see if it can be
switched on.
If the supply socket is working and the unit is still not
charging, take or send the tool and charger to your
local Black & Decker service agent.
Your screwdriver should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. Do not continue to use under these
conditions. Repeat the charging procedure.
Unplug the charger from the power supply before
disconnecting the charger from the tool.
Under certain conditions, with the charger plugged into
the power supply, the exposed charging plug can be
shorted by foreign material and may cause a fire.
Foreign materials of a conductive nature, such as but
not limited to steel wool, aluminium foil, or any build up
of metallic particles, should be kept away from the
charging plug.
Unplug the charger before attempting to clean.
MOUNTING THE CHARGER BASE
The plastic bag supplied with your screwdriver
contains two wood screws and two plastic wall plugs.
When you mount the charger base on a wall, use the
screws and the wall plugs.
1.2m max
For a wooden surface,
use the screws only.
Hold the charger base in
the desired position. You
must locate this position
within 1.2m of the
electricity supply.