Publicité
Les langues disponibles
Les langues disponibles
functions
POWER
TV POWER
POWER
TV POWER
AUTO
SOURCE
POWER
SPEAKER TV SOURCE
SoundShare
AUTO
REPEAT
SOURCE
POWER
SPEAKER TV SOURCE
TV VOL
TV CH
AUDIO SYNC
TV MUTE
TV INFO
TV PRE-CH VT DIMMER
SoundShare
SOUND EFFECT
SMART VOLUME
REPEAT
VOL
S/W
S/W
MUTE
LEVEL
LEVEL
VOL
3D SOUND
DRC
PLUS
TV VOL
TV CH
AUDIO SYNC
AH59-02545A
POWER
TV POWER
POWER
POWER
TV POWER
TV POWER
AUTO
SOURCE
POWER
SPEAKER TV SOURCE
SoundShare
REPEAT
AUTO
AUTO
TV VOL
TV CH
AUDIO SYNC
POWER
POWER
SPEAKER TV SOURCE
SPEAKER TV SOURCE
TV SOURCE
SOURCE
SOURCE
TV PRE-CH VT DIMMER
TV MUTE
TV INFO
SoundShare
SoundShare
SoundShare
SOUND EFFECT
SMART VOLUME
VOL
REPEAT
REPEAT
S/W
MUTE
S/W
LEVEL
LEVEL
VOL
3D SOUND
DRC
PLUS
TV VOL
TV VOL
TV VOL
TV CH
TV CH
TV CH
AUDIO SYNC
AUDIO SYNC
AH59-02545A
TV MUTE
TV MUTE
TV INFO TV PRE-CH
TV INFO
TV INFO
TV PRE-CH VT DIMMER
TV PRE-CH VT DIMMER
SOFTWARE UPGRADE
Samsung may offer upgrades for the Crystal Surround
Air Track's system firmware in the future.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB drive with the firmware upgrade
stored on it to the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load
them onto the USB drive singly and use them to upgrade
the firmware one at a time.
Please visit Samsung.com or contact the Samsung call
center to receive more information about downloading
upgrade files.
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will
turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
Once upgrading the product software is completed, turn off the product and then press and hold () button for
a while to reset the product.
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
Depending on the manufacturer, some USB devices may not be supported.
22
All manuals and user guides at all-guides.com
Using the Anynet+(HDMI-CEC) function
Anynet+ is a function that enables you to control other Samsung Devices
with your Samsung TV's remote control.
The Anynet+ function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable.
(See page 13)
2. Set the Anynet+ function on your TV and the SAT to ON. (See the
TV instruction manual for more information.)
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV and check for the
logo (If your TV has an
Anynet+ function.)
Using the TV functions (with Samsung TVs only)
• Press TV SOURCE on the remote control to change the TV's input source.
• Press TV INFO on the remote control to display the TV channel
information.
• Press TV CH on the remote control to select the TV channel.
• Press TV VOL on the remote control to increase or decrease the volume
level.
• Use TV PRE-CH button to move to the previous TV channel in TV mode.
When you press the SoundShare button, the TV's sound is
transmitted through the Air Track system via a Bluetooth
connection. The Air Track also controls the sound volume,
sound quality, etc.
The remote control can operate TVs made by SAMSUNG only.
logo, then it supports the
Publicité
