IKEA BEJUBLAD 004.672.96 Manuel D'utilisation page 9

ENGLISH
Electrical connection
WARNING: All electrical connections
must be carried out by an authorised
installer.
• Before making the connections, check that
the rated voltage of the appliance indicated
on the respective rating plate corresponds
to the power supply voltage. The rating
plate is affixed to the underside of the hob.
• Follow the connection diagram (located on
the underside of the hob).
• Only use original components supplied by
the spare parts service.
• The appliance is supplied with a connection
Warning Strips
cable.
• If damaged, replace the power supply
Warning strips show that specialist should do the connecting water, gas and electricity:
cables with the respective original spare
cables. Please contact your local IKEA store
call centre.
Caution!
Do not weld any of the cables!
Connection diagram
L = Black
L = Brown
N = Blue
N = Grey
= Yellow / Green
All manuals and user guides at all-guides.com
L1 = Brown
L2 = Black
N = Blue
230V 1N
N = Grey
= Yellow / Green
Electrical connection
• The wire connection has to be done by
specialized technician.
• This appliance has a Type "Y" attachment
and requires at least a power supply cord
Type H05V2V2-F. MONO-PHASE, BI-PHASE
connection: min. section of the conductors:
2,5 mm². External diameter of the supply
cord: min. 8 mm - max. 12 mm.
• This appliance has a Type "Y" attachment
13
with a cable type H05V2V2-F. MONO-PHASE
connection: min. section of the conductors:
5x2,5 mm².
• Connection terminals are revealed when the
connection box cover is removed.
• Make sure the characteristics of the
household electrical system (voltage,
maximum power and current) are
compatible with those of the appliance.
• Connect the appliance like shown in the
diagram (in accordance with the mains
voltage and country standard reference).
The electricity installation
specialist.
The gas installation specialist.
The water installation
specialist.
230V 1N
L1 = Brown
L2 = Black
N1 = Blue
N2 = Grey
= Yellow / Green
9
NL