Télécharger Imprimer la page

Sime Home Plus Manuel D'installation Et D'utilisation page 24

Publicité

Les langues disponibles

Les langues disponibles

– Press the encoder
click
move to the next "data/value"
Start: 05 02 2014 15 : 00
Stop:
Enable holiday:
Hot water OFF - Heat. OFF (nofrost active)
Cancel
– Rotate the encoder
basis of the holiday start date
– Press the encoder
click
move to the next "data/value"
– Continue in this way until all the necessary modifications
have been made
The user must work in a CIRCULAR manner ("rounda-
NB:
bout") therefore, ALWAYS MOVING FORWARDS, even if a mis-
take has been made.
– When all modifications have been made, press the button
to go back to the item "Holiday function"
Confirm
– Press the button
Esc
Zone
Menu
24
All manuals and user guides at all-guides.com
to confirm the modification and
HOLIDAY SCHEDULE
DAY
MONTH
YEAR
HOUR
05
20 02 2014 15 : 00
NO
Confirm
to modify the "data/value" on the
to confirm the modification and
to go back to the "main screen" .
Th 21 Sept 2014
10:30
Hot water 48°C eco
Winter automatic - set 20.0°C until 7.30
Mode
4.3.3
Fault warnings
If a fault occurs, the screen "Anomaly in progress" will ap-
pear in place of the "main screen".
For the main fault codes, a brief description and suggestions
for the user are displayed based on the seriousness and the
frequency with which the fault reappears.
ANOMALY IN PROGRESS
5 - Technical problem
Contact customer service
Name: xxxxxxxx
Phone:yyyyyyyyy
Esc
Back
The fault maybe a transient (volatile) fault or a fault which
the appliance.
blocks
To restore normal operating conditions:
– if the fault is transient, eliminate the cause of the fault
– if the fault causes a block, eliminate the cause of the fault
and then press the button
If there is no water in the system or low water pressure in the
system
there will be a request to fill the system and then press
the button
rather than
Confirm
ANOMALY IN PROGRESS
2 - Low pressure
Fill the system as per boiler's manual instruction
Esc
Charge
EN
ANOMALY IN PROGRESS
6 - No flame detection
Reset boiler
Esc
Reset
.
Reset
.
Reset
CONFIRM REQUEST
Confirm operation?
Cancel
Confirm

Publicité

loading

Ce manuel est également adapté pour:

8092282