Wiring Connection - Kenwood KDC-BT368U Mode D'emploi

INSTALLATION/CONNECTION

Wiring connection

Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
30
ENGLISH
Rear/front/subwoofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Fuse (10 A)
Microphone input jack
( 12)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control wire)
IMPORTANT : We recommend installing the unit with a
commercially available custom wiring harness specific for
your car and leave this job to professionals for your safety.
Consult your car audio dealer.
When connecting to an external amplifier, connect its
ground wire to the car's chassis to avoid damaging the unit.
To connect the Kenwood navigation system, refer
your navigation manual
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
To the steering wheel remote control adapter