Traynor YCV20WR Mode D'emploi page 6

Headphone Jack & Speaker Defeat
The headphone jack can be used with any stereo headphones. The headphone signal is
post-preamp and pre-master. This means the signal is affected by all controls, including
reverb, but not the Master Volume. For practicing silently, don't forget to disengage the
speaker outputs by depressing the Speaker Defeat button.
D.I. Out
21
The D.I. signal is derived from the same source as the Headphones, the pre-amp. The
balanced XLR output can be used to send the signal directly to a mixing console, poweramp
or another line-level audio signal processor. Don't forget to disengage the speaker outputs
(by depressing the Speaker Defeat button) if you like to record silently.
Power @ min. impedance (Watts)
Speaker Configuration - LF (Size / Power) Single 12 inch Celestion Greenback
Line Out (type / configuration) 1/4 inch TRS / Rear
Effects Footswitch / Function Yes / Channel Select / Boost
Warranty Two-year, unlimited (
20
Specifications
Type YCV20 Class 'A' Tube Guitar Amplifier
Cabinet Impedance (ohms) 8
15
Input Channels 2
Channel 1 - inputs 1/4 inch phono
Channel 1 - controls Gain, Volume
Channel 1 - switches Boost
Channel 2 - inputs Shares Channel 1
Channel 2 - controls Gain, Volume
Channel 2 - switches Channel Select, Brightness
Main Tone Controls Bass, Mid, Treble
Effects Loop / Location Yes / Rear
Internal Reverb / Effects Spring Reverb
LED Indicators Channel / Boost / Power / Standby
Dimensions (DWH, inches) 9.5 x 18 x 17
Dimensions (DWH, cm) 24 x 47 x 43
Weight (lbs / kg) 35 / 16
transferable warranty*
(
valid in USA and Canada only
4
)
even if you break it!
)