1. Connect the plug of the DC adapter (F) in the supply port located underneath the diffuser device. Place it on a hard, level surface.
2. Remove the exterior of the diffuser (D), (warning - the exterior may be in several parts), open the solution reservoir (A) by lifting the cover (C). Add the perfume (H) for the Maison
Berger Paris electric diffuser to the reservoir. Only fill to the MAX level indicated (80ml). The Maison Berger Paris fragrance refill is ready to use. Do not add water.
3. Close the perfume reservoir with the cover (C), taking care to correctly reposition the cover.
Then replace the exterior (D). Warning - the exterior may be in several parts.
4. Connect your diffuser using the USB port (F) or to the mains socket (E+F), if provided.
To operate this diffuser, you can use the remote control (G) or the button (B) located under the base of the diffuser.
5. Operation with the button under the diffuser (B)
5.1. Press the button located under the diffuser once to operate your diffuser in continuous diffusion with strong light intensity.
5.2. Press the button twice for intermittent diffusion with soft light.
5.3. Press the button 3 times to turn off your diffuser.
6. Remote operation with the remote control (G)
You can also use the remote control to operate the diffuser at a distance of +/- 3 metres:
1
2
30min
5
Diffusion
Continuous
8
At the end of the life span of this device, do not throw the appliance away with general
household waste. Please bring it to your local waste recycling centre
er
as
n
d
e
3
ON/OFF
4
60min1
20min
6
7
Diffusion
Off
9
10
Light
Light Off
Flicker
WASTE TREATMENT
Declaration of European conformity
Double insulation
Do not discard with household waste.
Dispose of the device in a recycling centre
ENGLISH - USER GUIDE
1. ON/OFF button: Press once to turn on the diffuser in continuous diffusion with strong light intensity. Press again
to switch off the diffuser.
2. 30 min button: Press once to activate the timer for 30 minutes. The diffuser flashes once to activate the
automatic stop after 30 minutes.
3. 60 min button: Press once to activate the timer for 60 minutes. The diffuser flashes twice to activate the
automatic stop after 60 minutes.
4. 120 min button: Press once to activate the timer for 60 minutes. The diffuser flashes three times to activate the
automatic stop after 120 minutes.
5. Continuous Diffusion button: Press to activate the continuous diffusion.
6. Intermittent Diffusion button: Press to activate the intermittent diffusion - 15 seconds on and 15 seconds off. This
feature allows the intensity of the fragrance diffusion to be lowered.
7. Diffusion Off button: Press to stop the diffusion.
8. Soft/Intense Light button: Press once for soft light. Press again for intense light.
9. Light Flicker button: Press to change to flickering light.
10. Light Off button: Press to turn off the light.
Capacity duration of fragrance diffusion
SPECIFICATIONS:
Ultrasound frequency
Power
Power supply input
characteristics
Power supply output
characteristics
Capacity of the reservoir
Reservoir filled to 80ml
Weight of the Aroma diffuser
Weight of the Résonance diffuser
3MHz
MAX 10W
100-240V - 50/60Hz 0.3A
5V - 2A
Max 80ml
approx. 6 to 8 hours
414g
646g