Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROLLER
REMOTE CONTROLLER
Using the steering remote
controller
You can assign the functions to the keys of the
remote controller on the steering wheel.
• This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not
compatible, learning may not be completed and
an error message may appear.
Registering/Changing the functions
1
Display the <System> setting screen.
On the Home screen:
• Press [ K ] repeatedly to change the page on
the <System> menu screen.
44
2
Display the <Steering Remote Control
Setting> screen.
3
Press a steering remote controller button
to register/change.
4
Select a function to assign.
• You can change the page to display more
items by pressing [ J ]/[ K ].
5
Repeat steps 3 and 4 as necessary.
6
Finish the procedure.
• The unit can register/change all of the button's
functions at the same time. To do this, press each
button in turn and after pressing all of them,
press [Done] in the <Steering Remote Control
Setting> screen. However, new functions cannot
be learned after this operation.
• When changing the functions already learned,
touch the button you want to change in step 3
and then touch to select the new function from
the function list.
• Confirm the contents of the settable functions in
the function list. You cannot edit the function list.
Initializing the steering remote
controller settings
1
Display the <System> setting screen. (See
the far left column.)
2
3
• To cancel the initialization, press [No].
Publicité
