Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Checkpoints
If the dryer operates abnormally, first check the list of problems in the table below and try the suggested
actions.
Problem
Does not run.
Does not heat.
Does not dry.
52
English
Untitled-1 52
• Make sure the door is latched shut.
• Make sure the power cord is plugged into a live electrical outlet.
• Check your home's circuit breakers or fuses.
• Press or tap Start/Pause (Hold to Start) again if the door is opened
during a cycle.
• Clean the lint filter.
• Check your home's circuit breakers or fuses.
• Some cycles do not require heating. Check the selected cycle again.
• For a gas dryer, make sure the gas supply is on.
• Clean the lint filter and exhaust duct.
• The dryer may have moved into the cool-down phase of the cycle.
• Turn off the Eco Dry option for the NORMAL or TIME DRY cycles. When
the Eco Dry option is on, the dryer performs an air dry process in the
beginning of the cycle to reduce energy consumption. The air dry
process does not use heated air, so you may feel that the dryer is not
being heated, but this is normal.
• Check all of the above, plus...
• Make sure the exhaust hood outside your home can open and close
freely.
• Check the exhaust system for lint buildup. Ducting should be
inspected and cleaned annually.
• Use a 4" rigid metal exhaust duct.
• Do not overload. 1 wash load = 1 dryer load.
• Dry heavy items and light weight items separately.
• Large, bulky items, such as blankets or comforters, may require
repositioning to ensure even drying.
• Make sure that your washer is draining properly and extracting
adequate water from the load.
• The load may be too small to tumble properly. Add a few towels and
restart the dryer.
• The load may be too large to tumble properly. Remove some items
and restart the dryer.
• Clean the lint filter.
Action
2021-10-20
11:36:49
Publicité
