Publicité
Les langues disponibles
Les langues disponibles
Operations
Special features
Child Lock
Child Lock prevents children from playing with the dryer. When Child Lock is activated, all buttons except
for the Power button are disabled.
To activate/deactivate Child Lock, simultaneously press and hold Dryness and Temp. for 3 seconds.
NOTE
Once Child Lock is activated, it will remain active even after you restart the dryer. If other buttons, except
for the Power button, do not respond, check the Child Lock indicator. If the indicator is on, follow the
instructions above to turn Child Lock off.
Alarm Off
You can turn the alarm on or off. When the alarm is off, the melody of cycle completion and the power-off
beep will not sound. However, the other sounds stay active.
• Press and hold Drum Light for 3 seconds to turn the alarm on or off.
• Your setting will be retained even after you turn off the dryer. You can turn the alarm back on by
pressing and holding the same button for 3 seconds.
Smart Care
To enable this function, you must first download the Samsung Smart Washer/Dryer app at the Play Store
or the App Store and install it on a mobile device featuring a camera function. The Smart Care function has
been optimized for Galaxy & iPhone series (applicable models only).
1. When the dryer detects an issue to check, an information code appears on the display. To enter Smart
Care mode, press and hold Wrinkle Prevent for 3 seconds.
2. The dryer starts the self-diagnosis procedure and displays an information code if a problem is detected.
3. Run the Samsung Smart Washer/Dryer app on your mobile device, and then tap Smart Care.
4. Put the mobile device close to the dryer's display so that the smartphone camera and the dryer face
each other. The app automatically recognizes the information code.
5. When the information code is recognized correctly, the app provides detailed information about the
problem with applicable solutions.
NOTE
• The function name, Smart Care, may differ depending on the language.
• If light is reflected off the dryer's display, the app may fail to recognize the information code.
• If the app fails to recognize the information code, you can enter the code manually in the app.
50
English
Untitled-1 50
2021-10-20
11:36:49
Publicité
