Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Keep the dryer clean for best performance and to lengthen its life cycle.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control
board and inlet valve.
Cleaning
Control panel
• Clean with a soft, damp cloth. Do not use
abrasive substances.
• Do not spray liquid cleaning agents directly
onto the dryer display.
• Some laundry pre-treatment soil and stain
removers may damage the control panel.
• When using liquid cleaning agents, apply
them to the cleaning cloth. Do not apply them
directly to the dryer. Wipe up any spills or
overspray immediately.
Drum
• Remove any stains from the drum with an all-
purpose cleaner.
• Tumble old towels or rags to remove any
remaining stains or cleaning substances.
Stains may be still visible but will not affect
subsequent loads.
Untitled-1 51
Powder coated drum
To clean the powder coated drum, use a damp
cloth with a mild, non-abrasive cleaner suitable
for easily marred surfaces.
Remove cleaner residue and dry with a clean cloth.
Dryer exterior
• Clean with a soft, damp cloth. Do not use
abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or
a detergent container on the dryer. They can
scratch or damage the top cover of the dryer.
• The dryer has a high-gloss finish on the entire
surface. Be careful not to scratch or damage
the surface.
Exhaust system
• Check and clean the exhaust system
on a regular basis to maintain optimum
performance.
• The external exhaust hood must be cleaned
frequently to ensure proper air flow.
English 51
2021-10-20
11:36:49
Publicité
