Changing Dust Bag - Panasonic MC-UG773 Manuel D'utilisation

Always operate vacuum cleaner with genuine Panasonic Type U12 Electrostatic or U10 HEPA
dust bags installed. Panasonic dust bags may be purchased through any authorized
Panasonic dealer or ordered from service company.

Changing Dust Bag

1)
➢ ➢ Pull down and outward on bag holder
2)
➢ ➢ Pull the cardboard collar of the dust
3)
➢ ➢ Spread out new dust bag, taking care
4)
➢ ➢ Attach new dust bag onto bag holder
5)
➢ ➢ Reinsert tabs on the bottom of bag
6)
➢ ➢ Rotate bag holder into closed
- 26 -
handle to remove from cavity.
bag sliding the dust bag out of bag
holder.
not to tear bag.
by holding cardboard collar and
sliding it back into the bag holder.
holder into groove on the front of
dust compartment.
position and press into place without
pinching dust bag.