Adventys OCTOPUS 3500 Notice D'utilisation page 37

Plancha Mode (accessory included):
This accessory is recommended for cooking fish, seafood and vegetables
Your product is equipped with a program specially designed for the use of your cast
iron plancha accessory. This program has been developed to heat the plancha to the
ideal temperature. To use the program, you just need to turn on your device, you will
go directly into Plancha Mode press, the PLAn value will be displayed..
This value continues to flash until you place the plate on the device.
The LED corresponding to the Plancha mode lights up. Using the +/- selection keys
you can choose between 3 preset levels:
- -
—> Low
The values flash until the required temperature is reached. Once the LED is fixed,
you can adjust the temperature using the +/- selection keys.
The +: Your accessory has a grease trap that prevents grease splatter during
cooking
Double Plancha Mode (accessory not included):
This mode works the same way than the single plancha mode, unlike that it allows to
control both zones at the same time in order to obtain the most even heat distribution
possible. To use this program, you'll just have to turn on one of the zone and press
the Double Plancha key in the middle of the control panel. A rectangle appears
on left display and the right one display PL.
In this mode, to turn on your device, you'll have to turn off the right zone by pressing
You can also use yout device without any of those accessories by simply using a com-
patible pan/pot.
If your device is turned off
Démarrer l'appareil à l'aide de la touche
•
passer en réglage puissance ou température il vous suffit de presser la touche Mode (2
fois pour Puissance - 3 fois pour Température).
If you have been using your zone with Grill/Plancha MODE
You cannot immediately switch your zone to Power or Temperature MODE. Turn off your
•
device, remove the cast iron accessory and then turn on the area again.
- -
- -
—> Medium
, vous êtes alors en MODE Plancha. Pour
37
- -
- -
- -
—> High
EN