Orgapack CR 208 P Mode D'emploi Et De Sécurité page 17

Fig. 4
Fig. 5
Fig. 6
08.05/WE
Tensioning
– Turn the knurled wheel at the rear of the air motor
clockwise, the strap is tensioned. Do not turn off
the motor.
For adjustment of strap tension (by
pressure regulator on maintenance unit),
see chapter 5.1.
Sealing
– Seal the straps using sealer (see operating instruc-
tion OR-V 40 P/OR-V 41 P).
Cut off strap
– Swivel the tool CR 208 P up and down until the
strap is cut off. Switch off the air motor by turning
the knurled wheel counterclockwise.
ORGAPACK CR 208 P
17