OXO FunStrip LED Mode D'emploi page 8

7. Operation Mode
The "LED Funstrip DMX" has two different operation modes. It can be used as a 07, 08, 10,11,
16 channel DMX dimmer. Tap "Mode" button to switch the operation mode between "Receive
Mode" and "Chase Mode".
Please follow illustrations below to operate the unit in your desired mode.
Mode Parameter
Address
Channel
DMX
No DMX OFF/
Glide
Program
Speed
Program
Master
Lamp Mode
Fade Time
8. DMX Mode
Use this operation mode only when you are about to use the unit as a DMX dimmer. This
function can allow you set your unit dimmer function as a 07, 08, 10,11 or 16 channel DMX
dimmer and DMX address.
User Manual - FUNSTRIP LED
Parameter Value
001-512
07/08/10/11/16
Hold/Program
OFF/ON
Full/01--16/AUTO
01-100
00-100
Tungsten/LED
00-100
V1.0 05/2021
Function
To set the initial DMX receiving
address
To set the DMX Control Mode
To set the status of the fixture
when
DMX signal is input
To set the output of the DMX Data
To select a built-in program
To set the speed level of the built-
in
Program
To set the intensity
To set the mode of Lamp
To set the speed of the Fadetime
8/24