Publicité
Les langues disponibles
Les langues disponibles
6. Overview
1. LCD Display
2. Mode button
3. Menu button
Note:
In the Chase mode, Menu key is used to only activate Chase Dimmer, Chase Program,
Chase Speed, Fade Time and Lamp Mode. While in the « Receive « mode, only used to only
select DMX Address, Channel.
4. UP Key
5. Down Key
6. DMX Out
7. DMX In
8. Power Input
9. Power Thru
10. Fuse
11. Power Switch
User Manual - FUNSTRIP LED
This multi-function display will detail all DMX Address, Chase ,
Program, Speed activity that pertains to the current operation mode of
the unit
This button will call up the unit operation mode between DMX and
Chase mode.
This button will active the different functions in Receive and Chase
modes.
This button will increase the displayed value in the LED display
This button will decrease the displayed value in the LED display
This connector sends your DMX signal through to the next unit
This connector accepts your DMX input signal
AC100-240V~50/60Hz, Max15A. The supply power is input into your
unit via this connector. Be sure to always connect to proper voltage
AC 230V, 50Hz, Max 15A. This connector sends the supply power to
the next unit
F3.15A 250V 5*20mm. These fuses prevent you from overloading
damaging your unit. Be sure to always replace with the exact same
type fuse
Turn on/off the power supply
V1.0 05/2021
7/24
Publicité
