OXO FunStrip LED Mode D'emploi page 5

3. Main Features
• 07, 08, 10,11, 16 DMX Channels selection
• Standard DMX 3-pin In/Out
• 16 built-in programs except for Auto & Full subject to Speed and Dimmer
• 0-100% dimming level
• Standard DMX-512 protocol
• 001 Thru 100 Chase Speed adjustment
• Power failure memory
• LED display window-4 digits Segment Display shows current activity and function state
• On/Off switch
• Fuse protection
4. Installation & Mounting
Before use, make sure whether four screws are secured firmly, if not, please secure them
with the screwdriver, loose 4 screws for lamp replacement.
The unit has also been designed to hold up as user's desire. So you can fix the unit on the
holder by the wing screw. They are placed in the accessory bag, included.
The following installation diagrams are for user reference.
Method 1 Method 2
Note :
Once this unit is for hanging application, it is required to use a safety rope (sold separately,
which can hold at least 10 times the weight of the fixture ) to ensure the mounting safety of
the fixture by attached through the holder.
User Manual - FUNSTRIP LED
V1.0 05/2021 5/24