Energy-Saving Tips; How To Remove The Thermometer/Alarm - Accucold ACR45L Manuel D'instruction

Energy-Saving Tips

•
The appliance should be located in the coolest area of the room or outdoor location, away from heat-
producing appliances and out of direct sunlight.
•
Ensure that the unit is adequately ventilated. Never cover air vents.
•
Do not keep the door open any longer than necessary. Remove as many items as needed at one
time, and close the door as soon as possible. Organize and label food to reduce door openings and
extended searches.
•
Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the
compressor to run longer.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the unit.
•
Unit shelves and storage bins should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the unit less efficient.

How to Remove the Thermometer/Alarm

4
If you need to disconnect the thermometer / alarm, please follow these steps:
1. Gently pull out the Thermometer / Alarm (1) and then disconnect it from the temperature sensor
cable. (Fig. 1)
2. Unscrew the three screws (2) and (7) to remove the shelf cover (3) and the glass bottle holder (6). Be
careful to hold the glass bottle holder (6) and temperature sensor glass bottle (5) firmly after removing
the screws. (Fig. 3)
3. Gently pull the temperature sensor head (4) out of the glass bottle (5).
4. Unscrew the screws (8) to remove the cable cover (9). (Fig. 2)
5. Now you can dismantle the temperature sensor cable (4) from the unit.
1
1
3
2
3
5
6
7
15
2
8
9
4