Publicité
Les langues disponibles
Les langues disponibles
Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the
side where the door hinges of the appliances are
fitted. Insert the appliance until the upper strip butts
up against the unit (1).
1
Make sure that a distance of 44 mm is maintained in
the lower part between the kitchen furniture and the
border of the appliance. (2)
The lower hinge cover inserted in the accessories
2
bag, is useful to guarantee the exact position of the
kitchen furniture and the appliance.
Also make sure that the appliance does not clamp
the mains cable.
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
I
I
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
D724
From the plastic cover (E), which is used to cover the
hinge with the pivot pin, you must take away the part as
indicated in the drawing.
This operation is made easer since there is, in the
internal part of the cover hinge lid a groove that facilates
the removal of this coomponent.
"Remove the part marked with DX, if the pivot pin is
inserted in the right hinge, SX in opposite case."
20
Publicité
