Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Attach the mounting bracket to the wall as shown in Figure 2.
Choose a mounting location that is free of electrical wiring or other
obstructions and is sturdy enough to support the weight of the hose
reel and hose as well as the force used to extend and retract it.
Note: hose and hose reel weigh approximately 30 pounds.
Purchase the appropriate fasteners at your local hardware store.
WARNING:
1) Do not mount hose reel onto ceiling.
2) Make sure the hose reel is secure before each use.
3) Never connect to an air source that is greater than 300 PSI.
4) Inspect the air hose before each use to make sure there are
no leaks.
5) Do not wrap the hose around any parts of the body.
6) This hose reel is for indoor use only.
Pull out the quick release
pin (E) and turn it
clockwise or counter-
clockwise 90 degrees,
insert the hose reel
bracket into the wall
mount bracket as shown
in Figure 3 and then turn
the quick release pin
clockwise or counter-
clockwise 90 degrees to
securely lock it in place
To remove the hose reel
from the wall mounting
bracket for remote use,
pull out the quick release
pin and turn it clockwise
or counter-clockwise 90
degrees then lift the hose
reel out of the mounting
Figure 2
bracket.
7
Figure 3
Publicité
