Publicité
Les langues disponibles
Les langues disponibles
U
SING THE 30 DAY DETERGENT DISPENSER
Filling dispenser
1. Unscrew the dispenser fill cap (figure 1).
2. Pour in your favorite liquid detergent, up
to 100 fluid ounces at one time.
3. Replace the dispenser fill cap.
4. Close the washer lid.
5. Open the washer lid.
NOTE:
Steps 7 and 8 only need to be done
ONCE when first filling the dispenser or
changing brands of detergent.
6. Move the slide indicator all the way to
the top (figure 1). Next, follow steps 7
and 8 to set the amount of detergent
used for the average load.
Figure 1
7
7. Place the cap of your detergent bottle
under the "PUSH" button. Fill the cap
with detergent from the dispenser as full
as you would for most of your loads by
pressing and holding the "PUSH" button
(figure 2). Place the detergent from the
cap either in the tub or back in the dis-
penser.
Figure 2
8. Move the slide indicator to the level of
the liquid in the sight glass (figure 3). For
your next load of laundry, just press and
hold the "PUSH" button until the deter-
gent moves down to the slide indicator to
dispense detergent directly into the tub.
Figure 3
9. The sight glass on the right side shows
how much detergent remains in the dis-
penser. Refill the dispenser when the
detergent level nears the bottom of the
refill indicator window.
Publicité
