Eureka DashSprint NEU610 Serie Guide D'utilisation page 8

!
When using tools, always place handle in
upright position. Make sure vacuum
cleaner is turned off while attaching tools.
• Place vacuum in upright position.
• Pull up on hose connection to release hose end
from hose inlet (Fig. 1).
• Push end of hose into top of handle and twist
clockwise until it clicks (Fig. 2).
• Press handle release latch and pull out handle
with wand (Fig. 3).
• To attach accessories, push desired tool onto
end of wand (Fig. 4).
• To use accessories without handle and wand, push
desired tool directly onto end of hose (Fig. 5).
•
counterclockwise and pull off handle. Slide
handle into top of vacuum cleaner and push
down until it clicks. Push loose end of hose
securely onto hose inlet. Store tools on vacuum
cleaner back. (See page 5.)
Pet tool
Use to remove pet hair from
stairs, carpet and upholstery
!
CAUTION: Make sure
vacuum cleaner is turned off
while attaching turbo brush.
Grasp collar and twist
counterclockwise to unlock
cover. Lift cover up.
8
Eureka Customer Service HELPLINE 1-800-282-2886
How to use accessories
Use for baseboard edges, corners,
detailing chairs, sofas, dryer vents
and tight spaces.
How to maintain pet turbo brush
With cover open, use fingers or
small brush to clear accumulated
hair and debris from turbo blades.
1 2
3
4
5
Use for furniture, drapes,
blinds, drawers and vents.
Close cover and twist collar
clockwise to lock.
Click!