Automatic ice maker
Description
Noise-prevention sheet
To turn down the dropping sound of ice cubes.
Do not throw away this sheet.
How ice cubes are made
Water supply
• Water is sent from the
water tank to the ice tray.
Ice making
• Ice cubes are made.
(8 pieces at one time)
• The number of ice cubes
per cycle may
sometimes
change.
Releasing
• Ice tray rotates to
release the ice cubes
and returns to "Water
supply".
• The ice tray doesn't
rotates when the ice
storage box is full.
Water tank
Capacity : Approx. 1.8 L
Upper limit temperature
of water : 60°C.
Ice tray
Ice tray is located at
the upper section in the
back.
(Unremovable)
Ice storage box
When you pull the ice
storage box, it leans
slightly and ice cubes
come to the front part of
the box.
Stored ice cube volume
(Maximum)
Normal size ice
: Approx. 232 pcs.
Large size ice
: Approx. 112 pcs.
Shovel
<Refrigerator>
Water tank
Pump
Pipe
Ice tray
Detection
lever
Ice storage
box
<Freezer>
Detection lever
The volume of ice cubes are
checked periodically by this lever.
Detection
lever
Full volume
The volume of ice cubes may
decrease if they are not smoothed.
(About half the volume)
Ice making
You can choose 2 sizes as shown below.
Mode
Icon
Normal ice
Large ice
Note
• The ice making time as shown above is only a rough
indication at the ambient temperature of 30°C,
temperature adjustment set to the initial setting
(refrigerator : 3°C, freezer : -18°C), Energy saving
turned off and with no opening or closing of the doors.
How to operate
• All the ice making modes are OFF(- - -) by a default
setting.
Procedure
1
Press enter key.
2
Press icon.
3
Press icon again.
• The size of ice cube switches in the order by
pressing the icon.
→
4
Press enter key.
Required time for
each ice making
Approx. 2 hours
Approx. 3.5 hours
Display
Current setting
(This indication shows OFF.)
The setting is
Current setting
changed.
(This indication
shows normal ice.)
→
EN-15
EN