Kenwood M-7000S Notice D'emploi page 51

11.4 Favourites (memory locations)
20 memory locations (favourites) are available for storing FM stations. To call up saved stations on the
main unit, please press the <*> button and select the desired memory location by pressing <SELECT>
.
11.4.1 Storing FM stations with the remote control:
Memory locations 1–10 can be assigned using the number buttons on the remote control. To do
this, select the desired station and press a number key on the remote control until "Preset stored"
appears on the display. The memory locations can now be called up by pressing the remote control
briefly.
11.4.2 Saving FM stations in memory locations 11 - 20:
Select the desired station and hold down the <FAV> on the remote control. Now select a memory
location from the list of station memories and confirm the selection with the <TUNE> button on the
radio. The "Preset stored" appears on the display. You can easily call up the memory locations by
briefly pressing the <FAV> on the remote control. Use the <UP/DOWN> buttons or the <TUNE>
knob to select a station and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.
12. Bluetooth Audio
The BLUETOOTH function enables the wireless transmission of music files (audio streaming) to the
radio. Smartphones, tablets or similar devices can be paired. To do this, select the source "Bluetooth
Audio" in the main menu.
12.1 Pairing Bluetooth devices for the first time (pairing)
Make sure that the terminal device to be paired is switched on and Bluetooth is activated. Select the
source "Bluetooth Audio" in the main menu. The "Loading" appears on the display. Now open
the Bluetooth settings on the terminal device to be paired and start searching for available Bluetooth
devices there. Select "M-7000S" and start the pairing process. After successful pairing, "Connected"
appears on the display. Now the music playback can be controlled via the terminal. To do this, use the
music App of your choice.
Basic operation of play/pause and skip forward/backward is possible using the corresponding buttons
on the remote control.
Note: Some terminal devices require a PIN code when connecting, then enter "0000".
12.2 Automatic connection after pairing has already taken place
If the source switches "Bluetooth Audio" or the radio is switched off, the Bluetooth connection is
disconnected. If the radio is switched on again or switched back to the "Bluetooth Audio" source,
an automatic connection is established.
19