Xingbang AH60A-L8B Manuel D'instructions Utilisateur page 38

Care and maintenance
If one of the lamps no longer functions, it may no longer be used. The bulb must
Lightning
be replaced.
The appliance operates using a hazardous voltage. Before replacing
Electrical shock hazard!
the bulb, disconnect the mains plug. Do not touch any live components
inside the socket.
Before opening the cover and removing the bulb, allow the bulb to
Risk of burns!
cool down.
Do not touch the new bulb with your fingers, because this will reduce
Important!
the service life. Use a dry cloth.
1. Disconnect the mains plug in order to interrupt flow of electricity.
2. Take out the grease filter and open the black protective cap of the plug-in
connection from inside.
3. Loosen the plug-in connection contained therein.
4. Carefully loosen the defective LED module downwards and replace the LED
lamp module (available via our Service Hotline – please see page 21).
5. Connect the plug-in connection and close the external protective cap.
6. Connect with power supply again.
18
General