Xingbang AH60A-L8B Manuel D'instructions Utilisateur page 32

Installation
5. Drill holes in the wall with a diameter of ø 9 mm at the marked spots. Put
wall plugs into the drill holes.
6. Tighten screws and mount hood carefully.
7. Open glass cap of hood , remove grease filter and draw the two inlying drill
holes.
8. Remove hood and drill the recently marked drill holes into the wall, ø 9 mm
and put in wall plugs as well.
9. Remount hood and put in and tighten all fixing screws.
12
Preparation