Installation
The carbon filters (odour filters) are filled with activated carbon that reduces the
Inserting the carbon filters for circulating air mode
kitchen vapours during cooking. If used regularly, these filters should be replaced
approximately every three months (see "Care and maintenance" – Carbon filters,
page 17).
1. Open the glass panel of the extracting hood.
2. Push the lock on the grease filter 1a to the left and remove the grease
filter carefully downwards.
3. Position carbon filters 1b as shown below on right and left on motor
and press on.
4. Insert the grease filter 1a into the recess on the left.
5. Push the lock to the left, press the grease filter 1a into place on the right
and release the lock. The grease filter 1a clicks into place.
14
1a
1a
Preparation