(Continued)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital Only/Analog only)
•
Favorite: Only channels registered as FAVORITE (p. 17)
Selects the screen menu language (p. 14)
Adjusts the clock (p. 14)
Sets channels (p. 32)
Selects the terminal and label of the external equipment (p. 35)
[Component 1/Component 2/HDMI 1/HDMI 2/HDMI 3/Video 1/Video 2]
To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu.
(p. 35) (On/Off)
Prevents "Image retention" with Wobbling. (Automatic/Force)
•
Automatic: Shifts the display image automatically.
•
Force:
Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time" menu.
Sets the time for "Pixel orbiter-Force" setting. (1/2/3/4)
Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is "Bright" to prevent panel "Image retention". (p. 43)
Press "OK" to start horizantal "Scrolling" on the screen (p. 43)
Controls equipment connected to HDMI terminals (p. 26) (On/Off)
•
"Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.
Sets "Power off link" of HDMI connection equipment (p. 26) (Set/No)
Sets "Power on link" of HDMI connection equipment (p. 26) (Set/No)
Selects the default speakers (p. 26) (TV/Theater)
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
•
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 36)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Set/No)
Note
•
Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD Mode", or Digital channel.
•
"No signal shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No signal shut-off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or front panel key
continues for more than 3 hours. (No/Set)
Note
•
Not in use when setting "Auto power on" or "On/Off Timer".
•
"No action shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No action shut off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Set "On" to play back SD cards automatically. (On/Off)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 32)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only)
Sets favorite channels. (p. 17)
Displays Closed Caption. (p. 34) (Off/On)
Changes the station identifier. (p. 33)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 33)
Adjustments/Configurations (alternatives)
Adjustments/Configurations (alternatives)
Surf mode
All
Language
Clock
Program channel
Pixel orbiter
Auto
Time
4
Side bar
Bright
Scrolling bar
VIERA Link
On
Power off link
Set
Power on link
Set
TV
Default speakers
Auto power on
No
No signal shut-off
Set
No action shut-off
No
Play SD card automatically
On
About
Reset
25