Makita CL183D Manuel D'instruction page 7

1
► 1. Handle 2. Capsule
Connect capsule, in accordance with alignment marks
on handle and capsule, firmly twist capsule in direction
of arrow until it is secured.
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both filter and pre-
filter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
OPERATION
CAUTION:
• Insert (or extract) nozzle while twisting it clock-
wise. If twisted counterclockwise, capsule may
become loose.
► 1. Capsule
2
1
7 ENGLISH
Cleaning (Suction)
Nozzle
1
► 1. Nozzle
Attach the nozzle to clean off tables, desks, furniture,
etc. Nozzle slips on easily.
Nozzle + Extension wand (Straight pipe)
2
3
► 1. Cleaner body 2. Extension wand 3. Nozzle
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor while standing erect.
Corner nozzle
► 1. Corner nozzle 2. Cleaner body
Fit on the corner nozzle for cleaning corners and crev-
ices of a car or furniture.
1
1 2