Videotec VERSO Hi-PoE IPM Manuel D'instructions page 13

VERSO HI-POE IPM AVAILABLE MODELS AND FEATURES
Operating Injector
temperature
From -10°C (14°F) PoE class 3 (13W)
up to +60°C
(140°F)
Hi-PoE class 4
(25W)
From -10°C (14°F) PoE class 3 (13W)
up to +60°C
(140°F)
Hi-PoE class 4
(25W)
From -30°C (-22°F Hi-PoE class 4
) up to +60°C (25W)
(140°F)
Tab. 3
8 Switching on
The automatic pre-heating (De-Ice) process
could be started whenever the device is
switched on and the ambient temperature
is below 0°C. The procedure is necessary to
guarantee correct operation of the devices
even at low temperatures. The duration
ranges depending on environmental
conditions (from 60 minutes up to 120
minutes).
During the lighting phase the device reads the
status of the dip switch and automatically detects
all the connected options for the correct energy
management of the housing.
MNVCHPVHPOE_1746_EN
Camera Demisting
system
PoE max. class
p
2 (7W)
PoE max. class 3
p
(13W)
PoE max. class
p
2 (7W)
PoE max. class 3
p
(13W)
PoE max. class 3
p
(13W)
Illuminator
–
p
–
p
–
The LEDs shown in the figure allow to check the
product's operating status.
Fig. 14
Refer to the table to identify the operating status.
Heater Fan with double
air filter
–
p
–
p
– –
– –
–
p
11