Installation Of Wall-Mounting Bracket; Use; Stop; Start - JRI SPY RF U Manuel D'utilisation

IV. INSTALLATION OF WALL-MOUNTING BRACKET
The bracket can be fixed thanks to its adhesive plaster or it can be screwed.
Screwing map
V. USE
a)

Stop

When you receive it, your SPY RF is stopped. Only the time clock is active. It can neither emit nor receive anything.
b)

Start

c)

Waiting mode

The SPY RF is ready to receive a configuration or to start a new recording session.
The triangles are on: there is
no configuration.
©JRI
Possibility to install
a lock against
robbery
To start your SPY RF, please press between 5 and 10"
on the button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- SPY RF is now in waiting mode
Remark: If you press >10'' => no effect => remains off
The symbol "Halt" is on:
- the SPY RF is configured
- possibility to restart it
depending on configuration
17