Publicité
Les langues disponibles
Les langues disponibles
HOTEL MODE
The hotel mode is a special mode which restricts some operations of TV. This allows the customer to use the
TV in special places such as hotels, prisons or hospitals. These restrictions are basically given below.
• The user cannot increase the volume above a specified limit. And can set fixed volume value.
• The user can enable headphone direct volume control.
• The user cannot reach some menus.
• The user cannot use the buttons on the TV.
• The user can limit the start-up source position.
• Last status can/cannot be used.
• Teletext can be disabled or enabled.
• NVRAM data (like service list and user preferences, etc.) can be copied to or from a USB device.
• Pin8 can/cannot be used.
To enter hotel menu, MENU/M-7-9-3-5 buttons consecutively.
HOTEL MENU ITEMS
Hotel Mode
Set as 'On' to activate hotel mode. In hotel mode, channel list and install menu are blocked.
Pin 8
Set as 'On' to enable picture mode changes accroding to Pin8 data.
Last Status
Set as 'On' to enable the TV to reopen with the closing status.
Panel Lock
Set as On to prohibit the use of the buttons on the TV.
RCU Inhibit
Set as 'On' to inhibit the use of the remote. To turn this option off, repeat the steps to open hotel menu.Remote
control will function in Stand-By mode independently from the setting of this option. If this option is set as
'Limited' only the Volume Up/Down, Programme Up/Down, Numeric Buttons and the Standby button on the
remote will be functional.
Startup Position
You can specify the opening settings of the TV. Choose the channel and/or source to be opened when the TV
is switched on next time. The available options are as the following:
Auto: The TV will open with the last channel(if TV was the last source) or last source.
TV: The TV will open with the channel that is specified in "Startup Channel" menu item.
Other: The TV will open with the specified source (EXT1, SIDE AV, HDMI1 etc.).
Startup Channel
You can specify a channel to be displayed when the TV is turned on next time (if 'Startup Position' is set as 'TV').
Volume Limit
Set the maximum value of the volume.
Fixed Volume Enable
Set as 'On' to enable the use of fixed volume value which is set in "Fixed Volume Value" menu item.
Fixed Volume Value
Set the value of the volume to be fixed.
Headphone Direct Volume
Set as 'Enabled' to control the headphone volume through remote control. When this feature is enabled,
volume control buttons will not change the TV's main sound. You can change the sound of the TV from the
'Sound' menu.
OSD Disable
The default value is set as 'Disable Setup Menus' for hotel mode. You can block all menus by setting this item
as 'Disable All Menus'. Invisable Setup Menus are:
English - 46 -
Publicité
