Application; Mobile Workbench / Roller Cabinet - Garant System-Arbeitsplatz Manuel D'utilisation

Mark out the drilling
X X
positions through the holes
in the support legs.
Move the workbench aside
X X
and drill the anchor holes.
Diameter: 8 mm
X 
Depth: 60 mm
X 
Insert plugs. Comply with
X X
the manufacturer's data
regarding the plugs.
Position the workbench
X X
precisely at the erection
position over the anchor
holes.
Bolt the workbench to the
X X
floor.
6.

Application

WARNING!
Risk of injury due to the workbench tipping over and workpieces falling
from it.
If workpieces overhang the edge of the workbench there is a risk of tipping
over.
Where necessary, anchor the workbench to the floor.
X X
Secure the overhanging workpieces.
X
X
Before using the workbench, always check it for damage.
X X
Keep the workbench and accessory parts clean.
X X
34
6.1.

Mobile workbench / roller cabinet

a
➀ Worktop
➁ Frame
➂ Individual locking
Mobile workbenches / roller cabinets which are not fitted with an
undercarriage, which can be lowered, are fitted with parking brakes on the
castors, which secure them against accidentally rolling away.
Mobile workbenches / roller cabinets must be secured before starting work.
When using mobile workbenches / roller cabinets, note the following
points:
Before moving it
Close all drawers, and ensure that the individual drawer catches have
X X
engaged.
Close the central locking.
X X
Remove all moveable and unsecured objects from the workbench/roller
X X
cabinet.
Release the castor parking brakes, or raise the workbench using the
X X
lifting mechanism.
Apply only your own body weight to move the workbench/roller
X X
cabinet; push it only with walking speed.
If transporting on vehicles or in lifts
Secure the workbench/roller cabinet.
X X
Comply with the safety instructions issued by the vehicle or lift
X X
manufacturer.
s
a
d
f
g
➃ Castor with parking brake
➄ Fixed shelf
➅ Undercarriage that can be lowered
DE
s
d
h
EN
ES
FR
IT
35