Fitting The Storage Shelf; Fitting The Side Panels; Assembling A Kombi Hexagon Workbench - Garant System-Arbeitsplatz Manuel D'utilisation

4.3.2

Fitting the storage shelf

The side faces of the support cross braces carry holes for securing the
storage shelf.
Position the storage shelf
X X
between the cross braces
on the supports, and screw
it on.
Tighten the screws on the
X X
support legs.
4.3.3

Fitting the side panels

The inner faces of the support legs carry holes for securing the side panels.
Stand the workbench back
X
X
on its feet.
Position the side panel
X X
between the support legs
and screw it on.
30
4.4.

Assembling a KOMBI hexagon workbench

Position all drawer unit shells as shown on the dimensioned drawing.
X X
Place both halves of the
X
X
worktop on the drawer unit
shells.
Precisely position the joint
X X
cover strips.
Insert the connector clips
X X
and tighten the screws.
Align all the drawer unit
X X
shells.
Maintain the correct
X
X
projection of the worktop
at the tops of all drawer
unit shells.
30 mm
31
DE
EN
ES
FR
IT