Specific Precautions; Safety Instructions - Husqvarna TS 1000 F Manuel D'utilisation Et D'entretien

Specific precautions

The manufacturer declines any liability resulting from
misuse or modification of the saw.
Although designed for safe and reliable service when
used according to instructions, there is a risk of harm to
the user or damage to the saw unless certain
precautions are taken. In particular, the following points
must be regularly verified at the worksite:
•
perfect technical conditions (saw used for suitable
jobs considering potential risks; elimination of any
malfunctions jeopardizing safety),
•
use of a diamond disk for water sawing (cutting fresh,
old or coated concrete, asphalt); use of any other
type of disk (eg abrasive, saw) is strictly forbidden
•
competent personnel (qualification, age, training,
skill), who understand the manual in detail before
starting work. Any electrical, mechanical or other
defect or failure is to be inspected by an authorized
service expert (eg electrician, maintenance manager,
official dealer)
•
observance of all warnings and directives marked on
the machine (eg use of personal protective
equipment); users must follow all instructions and
comply with all safety rules
•
no modification, transformation or addition that could
potentially effect safety may be performed without the
manufacturer's express authorization
•
periodic inspections must be carried out as specified,
at the intervals specified
•
original manufacturer's spare parts must be used for
any repairs.
DO
DO carefully read and make sure that you have
understood all instructions before using the saw.
DO keep all safety guards in place
DO always wear approved ear, eye, head and
respiratory protective equipment
DO always keep a safe distance from the disc
and other moving parts
DO know how to stop the saw fast in case of
emergency.
DO stop the motor and let it cool down before
refueling.
DO check the disc, clamps and shafts for damage
before installing the disk
6 - English

SAFETY INSTRUCTIONS

DO use only discs marked with a maximum oper-
ating speed greater than that of the disk shaft
DO exercise all due care and follow all instruc-
tions when loading and unloading saw.
DON'T
DON'T allow other people nearby when starting the
saw, refueling or cutting
DON'T run gasoline (petrol) motors in a confined
space without appropriate ventilation
DON'T use damaged equipment or disks
DON'T operate the saw in the vicinity of flammable
products. Sparks sprayed by the saw may
cause fire or explosion.
DON'T authorize disc protection under 108° C
DON'T leave saw unattended with motor running.
DON'T use under the influence of alcohol or drugs.
IGNORING THESE WARNINGS MAY
RESULT IN DEATH OR SERIOUS
BODILY HARM.