Publicité
Les langues disponibles
Les langues disponibles
®
iPod
(Optional)
Rotary encoder
/
/ENT
SOURCE/
/RTN
/ESC
®
An iPod
can be connected to this unit by using the proprietary podcast
ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guaranteed.
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver. 1.2.1
iPod mini: Ver. 1.4.1
iPod nano: Ver. 1.2
• The unit cannot be used with software versions earlier than "2006-
06-28". For details about "iPod Software Update," refer to the iPod
Instruction Manual.
Playback
1
Press SOURCE/
to switch to the iPod mode.
1
TUNER
XM/SIRIUS*
3
CHANGER*
TUNER
1
*
Only when XM Radio or Sirius Radio is connected.
2
*
Only when the iPod is connected.
3
*
Only when the CD changer is connected.
2
Press
or
to select the desired song.
Return to the beginning of the current song:
Press
.
Fast backward:
Press and hold
.
Advance to the beginning of the next song:
Press
.
Fast forward:
Press and hold
.
3
To pause playback, press
/ENT
Pressing
/
again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
6
4
5
Preset buttons
TITLE
(1 through 6)
2
DISC
iPod*
/
/ENT.
Searching for a desired Song
An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit's search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.
Hierarchy 1
Hierarchy 2
Playlist
Song
Artist*
Album*
Album*
Song
Song
—
Podcast
Episode
Genre*
Artist*
Composer*
Album*
For example: Searching by Artist name
The following example explains how an ARTIST search is
performed. Another search mode can be used for the same
operation, although the hierarchy differs.
1
Press
/ESC to activate the search selection mode.
2
Turn the Rotary encoder to select the Artist search
mode, and then press
Playlist
Artist
Album
Composer
Playlist
3
Turn the Rotary encoder to select the desired
Artist, and then press
4
Turn the Rotary encoder to select an album, and
then press
/
/ENT.
5
Turn the Rotary encoder to select a song and
press
/
/ENT.
The selected song is played back.
• After pressing and holding
in each hierarchy (except SONG hierarchy), all songs of the selected
hierarchy are played back.
• After selecting [ALL] in the search mode with "*", press and hold
/
/ENT for at least 2 seconds to play back all songs in the iPod
or selected search mode.
• While in the search mode, if you press and hold
2 seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• In the search mode, pressing
mode.
• Search cannot be made during M.I.X. play.
• "NO SONG" will be displayed if there is no song in the selected
playlist in the playlist search mode.
• "NO PODCAST" will be displayed if there is no podcast data in the
iPod in the PODCAST search mode.
• If "iPod name" stored in the iPod is selected in the desired playlist
search mode and
/
/ENT is pressed, you can search for all songs
in the iPod. Also, if you press and hold
seconds, all songs in the iPod are palyed back.
• Depending on the iPod, podcast search is not supported.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 26.
Hierarchy 3
Hierarchy 4
—
—
Song
—
—
—
—
—
—
—
Album*
Song
Song
—
/
/ENT.
Song
Podcast
Genre
/
/ENT.
/
/ENT for at least 2 seconds while
/ESC for at least
/RTN will return to the previous
/
/ENT for at least 2
25
-EN
Publicité
