LG WM1455H A Serie Manuel Du Propriétaire page 16

us_main.book.book Page 16 Friday, March 6, 2020 10:25 AM
16 INSTALLATION
3
Select the Downloaded cycle. The default
cycle is Rinse+Spin.
4
Press the Start/Pause button to start the
wash cycle.
5
Make sure that water is supplied, that the
washer does not rock or vibrate excessively,
and that it drains well during the spin cycle.
NOTE
• If water leaks during water supply, see
Connecting the Water Inlet Hoses to connect
them properly.
• If the washer rocks and vibrates excessively, see
Leveling the Washer to level it again.
• If the drain does not work, see Connecting the
Drain Hose to install the hose properly.