Kuppersbusch IKE328022T Notice D'utilisation page 7

FastFreeze function
This function stops automatically after 52
hours.
1. To switch on the function:
a. Press Functions button until the
corresponding icon appears.
The FastFreeze indicator flashes.
b. Press OK to confirm.
The FastFreeze indicator is shown.
2. To switch off the function before its
automatic end:
a. Press Functions button until the
FastFreeze indicator flashes.
b. Press OK to confirm.
The function switches off by
selecting a different freezer set
temperature.
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by
flashing the alarm icon and freezer
temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds, then displays the set temperature
again.
The alarm indicator continues to
flash until the normal conditions
are restored.
ChildLock function
To lock any possible operation through the
buttons select the ChildLock function.
1. Press Functions button until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
All manuals and user guides at all-guides.com
The ChildLock indicator is shown.
3. To switch off the function press
Functionsbutton until ChildLock
indicator flashes, then press OKto
confirm.
The ChildLock indicator goes off.
DrinksChill function
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful, for example, when you want to
rapidly chill food products for a certain
length of time.
1. To switch on the function press
Functions button until the
corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes)
for a few seconds.
2. Press the Timer to change the Timer set
value from 1 to 90 minutes.
3. Press OK to confirm.
DrinkChill indicator is shown. The Timer
starts to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm
sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate
the function at any time
during the countdown by
pressing Functions until
DrinksChill indicator flashes
and then pressing OK to
confirm.
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
7