Télécharger Imprimer la page

Chicco Kory Essential Mode D'emploi page 40

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
M. Diagonal belt guide
N. Canopy
Base (Fig. 3)
A. Rebound bar
B. Isofix connectors
C. Isofix attachment indicators
D. Isofix connector buttons
E. Support Leg
F. Support leg height adjustment button
G. Leg support correct installation indicator
H. Car seat release levers
I. Car seat attachment sites
J. Indicators for correct attachment of car seat to base
K. 360° Seat rotation button
L. Correct position for travel indicator
M. Isofix guide
CORRECT POSITION IN THE VEHICLE
40-80 cm
The Kory Essential car seat can be installed in two different ways: with
the Full 360 i-Size base and without the Full 360 i-Size base, using just
the vehicle seat belts. The Full 360 i-Size base can be purchased
separately as an accessory.
• Configuration with the base
This is an advanced i-Size child restraint system, type approved pur-
suant to ECE R129 for use on vehicle seats compatible with the i-Size
system in accordance with the indications provided by the vehicle
manufacturer in the instruction manual for the vehicle. If in doubt,
consult either the enhanced child restraint equipment manufacturer
or the retailer. If the vehicle does not have an i-Size seat check the
vehicle compatibility list, available via the QR code on the product
installation label and at the end of this manual.
• Configuration without the base
This is an advanced i-Size child restraint system, type approved pur-
suant to ECE R129 for use on vehicle seats compatible with the i-Size
system in accordance with the indications provided by the vehicle
manufacturer in the instruction manual for the vehicle. If in doubt,
consult either the enhanced child restraint equipment manufacturer
or the retailer.
INSTALLATION
Built-in harness sys-
tem + Full 360 i-Size
40-80 cm (rear-fac-
base with Support
ing)
Leg OR Built-in har-
ness system + vehi-
cle seat belts
1. 40-80 cm (Max 13 kg) "Integral Universal ISOFIX "i-Size""
- installation with Full 360 i-Size base with Support Leg
rear-facing (see illustrations from number 4 to 13B)
The reducer cushion must be used from 40 cm to 60 cm.
Reducer cushion
From 40 cm to 60 cm
40
40-60 cm
40-80 cm

Publicité

loading